DIY Faraday Cage
This is how we spent our Thanksgiving. Scanning for BLE from droids has… escalated. We…
Teal Kyber Resin Color Test
First quick resin color test for a custom teal kyber crystal. I used UV resin…
Custom Unstable Blade Diffusion Test
For my custom tealsaber, I designed to make a custom unstable blade using hot glue…
Kybers & Blacklights
Someone on the Discord asked if the kyber crystals were reactive to black lights. Finally,…
Dissolving RFID Fob
Trying to see if we can safely liberate this little RFID chip and antenna from…
Receiving Holocron IR Signals
I almost forgot about the holocrons! When you place a Jedi holocron next to a…
Testing the Color Range of the Blade’s LEDs
Video: Cycling through colors and white brightness levels using an Arduino Uno. Now that we…
Neopixel Jewel Test for Blade Plug
It’s working!
Holocrons IR Communication
I almost forgot about the holocrons! When you place a Jedi holocron next to a…
Controlling Saber Blade Using PWM
Spork controlling the colors of the blade using PWM, via an Arduino
Unrelease Orange and Teal Kyber Colors
Do you want a perfect example of front end and back end devs working harmoniously…
Reading from the Saber Using Software Serial
More Arduino testing. This time I’m controlling an LED using the software serial to detect…
Tealsaber Progress
More tealsaber progress.
Another New Test Rig: Meet Hilt Tester 3.0
Hilt tester version 3.0– NOW WITH FLAT CONTACTS! Lasercut top, copper tape, soldered wires, and…
Using Arduino Serial Monitor
I hooked the hilt up to Arduino to try to see if there was anything…
Kyber Crystal Data Dump
Using the Proxmark RFID reader, we scanned the kyber crystals we had and then dumped…
Hilt Test Rig 2.0 & Reverse Engineering Wires
Hilt Testing Rig 2.0– Now with HANDLE for easy removal. XD With a way to…
Test Wiring Rig
If we’re gonna interact with the electronics, then we need to be able to connect…