Comparing Saber Blade LEDs
Comparing the original Stock Savi blade internals with Dok’s 26” blade.
Controlling Saber Blade Using PWM
Spork controlling the colors of the blade using PWM, via an Arduino
Analyzing Logic & GWTS
So… I’ve been working from the theory that they must be using an existing LED…
Reading from the Saber Using Software Serial
More Arduino testing. This time I’m controlling an LED using the software serial to detect…
Using a Logic Analyzer
Analyzing data from the hilt using a Logic Analyzer and Pulseview, while doing lots of…
Tealsaber Progress
More tealsaber progress.
Another New Test Rig: Meet Hilt Tester 3.0
Hilt tester version 3.0– NOW WITH FLAT CONTACTS! Lasercut top, copper tape, soldered wires, and…
Holocron Teardown
Jedi Holocron teardown.
Using Arduino Serial Monitor
I hooked the hilt up to Arduino to try to see if there was anything…
Blade Test Rig with Pogo Pins
Now it was time to figure out how to communicate with the blade. I designed…
Scanning Kyber RFIDs
Savi’s Custom Lightsabers and Dok’s Holocrons all work with kyber crystals via low frequency (LF)…
Hilt Test Rig 2.0 & Reverse Engineering Wires
Hilt Testing Rig 2.0– Now with HANDLE for easy removal. XD With a way to…
Test Wiring Rig
If we’re gonna interact with the electronics, then we need to be able to connect…
- 1
- 2